Sample Edit 01/27/2013

NISSAN SKYLINE GT-R R32

Like i promised, here's the edit of the example rig shot i did of my friend's R32. So let's jump right into it.

Now that you know how to do rig shots (assuming you read my last post), you're gonna need to know what to look out for when it comes to post-processing. This is roughly how i go about editing rig shots. Maybe you'll learn a few things, maybe you won't, but let's get started..

I guess if you're completely new to the idea of a rig shot, then this should be new to you as well. No worries though, we'll work the kinks and details out using photoshop.

Original, straight out the camera

Let's get started...

So for this shot, i planned out step by step what i wanted to do first and what i wanted to do last. For me i chose to get rid of the camera/boom reflections first before getting to the actual rig itself.

Better get good at cloning

Starting from the bottom up, i dealt with the reflections first as they were the easiest to fix. Most of this was done using the clone stamp tool, and a bit of the smudge tool on certain parts to smooth it out. Be careful when using the smudge tool, remember to take your time. 

Sourcing for the clone stamp basically came off neighboring pixels, so cloning and blending wasn't difficult. Just be careful and make sure your blending is spot on before going to the next step.

Fudge'd it? It's ok, just smudge it.

After doing the bumper and the head light, the next section to cover is the fender. Essentially the same tools were used here, the clone tool and then the smudge tool. I started out by outlining the portion of the fender that i wanted to select using the pen tool. After i've got a smooth curve covering where i want to clone, i filled the area in and tried to mimic the reflections from the rest of the fender. Once i was finished with the clone tool, i switched over to the smudge tool and smeared the cloned layer bit by bit until i got a smooth finish. 

Doesn't sound like much fun, but it works when it's done right. Honestly, this took a couple tries to get it right, so don't expect to get it bang on the first time around.

Time to fabricate a new hood

So.. next step is the hood. Aside from fixing the clouds, fixing the hood is the second most important part of the shot. Like the previous portion with the fender.. we do the same thing. The only difference is the scale that we're working at. 

Again, start by using the pen tool to get a smooth outline of the hood. Remember to select the entire hood, all the way from the grill to the windshield. If you can't make out the exact shape, then over approximate by a bit and erase the extra bits later. There are two ways to approach this.. by using the clone tool then smudging OR duplicating the hood entirely and smudging it from the grill all the way to the windshield. Either way works well, so long as the part looks smooth and correlates well with the rest of the hood. Make sure the reflections match, otherwise it's going to look fairly awkward. Again, this might take a while to perfect, so if you're anything like me.. getting it just right will take time.

Rig removal

The next big step is to take out the rig from the background. This means making new clouds from the pre-existing ones and so fourth. In one go i went and took out the rig by cloning surrounding portions big enough to cover it up. This part probably took me the longest; it took roughly 10 tries to get it right.. but eventually i got around to it. To make the sky match more appropriately, i used clouds from other portions of the picture. These parts were then transformed and fitted over top of the rig section. For steps 3 through 6 i repeated this until it the entire rig section was covered.

Free windshield replacement

Now that the hard part is over and done with, finishing touches need to be made. Although it seems miniscule.. i decided to redo the windshield as open window stuck out like a sore thumb. Same thing as always, select, clone, then smudge until the reflection matches.

Picky is good

Getting down to the nitty gritty details of the car now. Remember to clone out things like dust on the camera lens, rock chips, odd reflections, etc. When ready, finalize the picture and edit it like usual. For this shot, all i did was straighten out the frame, bumped brightness/contrast, saturation by a bit, and exposure as well.

Finished

... and this is what i ended up with! For what it's worth, rig shots definitely do make or break a set. So whenever you can, do rig shots! Remember that practice makes perfect. Editing these kinds of shots takes lots of practice and some improvisation. Work with what you've got and make it happen!

If you're too lazy though, pirate VirtualRig studio and call it a day.

Photoshoot Impossible

It took me forever to find this on youtube. This is by far my favorite automotive video on the internet. Why? Just watch and see for yourself.

The comments pretty much sum up the video... but I'll let you guys judge for yourselves, enjoy!

(I don't know if you could sense the sarcasm here, but it's okay. Calm your horses. Haters)